
AGI SureTrack Marketing
- Total activity 352
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 112
Posts
Recent activity by AGI SureTrack Marketing-
Where do I set my threshold alerts?
In the SureTrack platform, go to EQUIPMENT/TANKS/Settings/Threshold. Here you can set your lower and upper threshold percentage.
-
I can't see my grain in the bin
Under EQUIPMENT/STORAGE/BINMANAGER Click VIEW DEVICE Then SETTINGS/ADVANCED See Auto Sensors Quick Detect, Click RUN.
-
Heater Failure
Check fuel level Check the igniter for corrosion
-
Where can I see my plenum reading?
Click EQUIPMENT at the top. Click STORAGE and find the device you'd like to explore. Click VIEW DEVICE. Click Graphs, then scroll down to HOURLY AVERAGE WEATHER VS PLENUM chart.
-
Why should I leave my system on in the off season while empty?
To ensure that your system stays up to date. The AGI SureTrack Coach can keep an eye on system to mitigate any potential issue that might arise so it can be resolved before harvest. Finally, your ...
-
Why does my inventory fluctuate when I am not moving grain?
The grain mass might be covering a sensor and potentially being affected by head space temperature changes giving the illusion of grain movement.
-
Why do my EMC readings on the weather station display differ from bin to bin?
If they are different commodity, that will reflect in a different EMC reading. EMC is calculated based off of commodity. If they are the same commodity, it could be different if it is using network...
-
Why are my fans not running to cool my hot spot?
It could be due to the weather outside. If the air that will be used by the fans is equal to or greater than the hot spot temperature, it will not run and heat up the rest of the bin.
-
Why does my level seem inaccurate?
Tank size and calibration may be off. Go to EQUIPMENT/TANKS/Settings/Threshold to confirm your tank capacity is correct, or contact your AGI SureTrack Coach to verify tank measurements and calibrat...
-
My platform looks different!
Welcome to the new and improved SureTrack 2.0! We missed you. You can find a full video tutorial here or a print version quick start guide can be downloaded within the platform. Most of that infor...