Equipment - Storage

1. Select STORAGE in the sub menu on the left. Upon selection, your storage devices will populate giving you a quick view of current conditions.
2. View all active storage in default 3D view
   Quickly view storage contents, performance and alerts
3. Easily switch to the traditional storage view by selecting TABLE VIEW above 3D storage view
   Check bottom left corner of each storage device for specific SureTrack hardware: BinManager, BinCheck Deluxe, PileManager, PeanutManager, PecanManager, or PistachioManager
4. Select VIEW DEVICE to navigate to the Bin Summary

Upon selection, users can find SureTrack 1.0 data options by selecting sub menu links on the
left. These data options have a new and improved look.
Bin Summary

1. STATUS - see operation normal or event alerts here
2. COMMODITY
3. INVENTORY - view fill level
4. STORAGE STATUS with 3D and TABLE toggle option
   Show Cables - check-boxes to turn on/off specified cable view
   View Mode - drop down
   Time Frame - drop down and conditioning playback
   TIP: Use the scroll wheel on the mouse to zoom in and out on an active bin
5. OPERATION MODE
6. SWITCH POSITIONS
7. SURETRACK LAB RESULTS - viewable graph of characteristics rank
8. SAMPLE TESTER RESULTS - on site test results assigned to this bin
   Aerial Map Location

Select Graphs on left, then select the bin and a desired date range

1. TEMPERATURE - scroll over graph for a quick view
2. MOISTURE -click three lines to print or download
3. FAN AND HEATER RUNTIME
4. HOURLY AVERAGE WEATHER VS PLENUM
   INVENTORY
   CARBON DIOXIDE
   Select Tables on left, then select a bin and a desired date range
5. DAILY VALUES providing moisture and temperature on an hourly view
6. ALL SENSORS
   TEMPERATURE per cable and sensor
   MOISTURE per cable and sensor
   WEATHER STATION & PLENUM
   HEADSPACE

Select Logs on left, then select a desired date range

1. Choose to view by SELECT ALL or individually by selecting check boxes:
   HOURLY REPORTS
   HOURLY EVENTS
   COMMANDS
   CONFIRMATIONS
   ALERTS
   CHANGES
   Select Settings and open to General settings within tabbed options
2. NAME/GROUPING - Device name, choose a device group if applicable
3. DIMENSIONS
   BIN DIAMETER and HEIGHT
   ROOF SLOPE drop down
   Select HOPPER BOTTOM or BEAN LADDER
4. FAN DETAILS
   FAN MANUFACTURER, MODEL
   NUMBER OF FANS
   LOCATION
   DEVICE ADDRESS
   LONGITUDE AND LATITUDE
   Select Operation tab at the top of the page
5. COMMODITY - assign crop and variety name
6. SENSOR LEVEL - drop down selection
7. OPERATION MODE - set running mode, enable heater and set
   desired temperature
   Click the Power Usage tab at the top of the page
8. POWER SHARING - control fan usage
9. BLACKOUT PERIODS - establish downtime for all fans
10. LOAD CONTROL - allow your power company to remotely turn off fans

Click the Advanced tab at the top of the page

1. REQUEST LATEST REPORT - get data from your device up to the
   current hour
2. AUTO SENSORS QUICK DETECT - quickly identify in-grain sensors with BinManager
3. SWITCH ASSIGNMENTS - assign BinManager switches to fan or heaters